Sterilization device | Autoclave
Laboklav ECO Wastewater

FAST STERILIZATION OF LARGE VOLUMES OF LIQUIDS

The destruction sterilization of large liquid containers often results in long cycle times due to the volume and the specific thermal properties of the liquids. To ensure complete elimination of all microorganisms, the sterilization temperature must be uniformly reached throughout the container and maintained for a sufficient duration. Factors such as the thermal conductivity of the container material, the heat capacity of the liquid, and its evaporation properties influence the process. Additionally, the homogeneity of the liquid and potential barriers created by the container material play a role, potentially extending the sterilization cycle.

The Laboklav ECO Wastewater series laboratory sterilizers are equipped with a sterilization chamber with a volume of approximately 140 liters, designed for the sterilization of liquid media such as cell cultures or wastewater. In exceptional cases, other items can also be sterilized, such as instruments or materials intended for non-medical purposes. (In such cases, a technician from SHP Steriltechnik AG must be consulted beforehand.)

Laboklav ECO Wastewater

Laboklav ECO Wastewater
powerful and reliable

The Laboklav ECO Wastewater was specifically designed for the rapid sterilization of large volumes of liquids. It allows direct filling of the chamber with up to 100 liters of liquid media, which are fully sterilized in approximately 4 hours. 

Once the chamber is filled exclusively with liquid media, the chamber lid is motorized and sealed. The liquid is then heated to the required sterilization temperature and maintained for a set duration. After the sterilization phase is complete, the chamber is automatically drained using compressed air. To protect the disposal lines from overheating, tempered tap water is mixed in during the process.

up to 100 l

equipped for the sterilization of large volumes of liquids

direct filling of the chamber with up to 100 liters of liquid to be sterilized, only aqueous solutions

spacesaving

universally installable
Dimensions for installing:
B x H x D:
840 x 965 x 700 mm
(vertical autoclave)

variable display orientation

efficient & durable

steam generation based on the principle of direct boiler heating
Power: 6 kW

heating elements are not submerged in water (thereby extending their lifespan)

as standard

integrated dot matrix printer

exhaust air filtration

automatic emptying of chamber by injection of compressed air

  • Power 6 kW
  • Heating elements are not submerged in water, thereby extending their lifespan

The high-performance steam generation is achieved through heating elements that are directly in contact with the chamber floor. The sterilization medium itself is used for steam generation. Both the heating elements and the chamber are protected against dry running by over-temperature switches.

Laboklav Wastewater 135

Product features and technical specifications

Sterilisation chamber
Heated directly by heating plates in contact with the base of the chamber

Lid and closure
Hinged lid with motorised closure, safety lock

Lid seal
T-profile seal, silicone

Temperature measurement technology
PT100 measurement probes, independent of one another, with stabilisation time T0.9 = 3 s, 2-wire technology, internal resolution 0.01 K, display resolution 0.1 K (calibratable)
Probe breakage and short-circuit monitoring

Reference measuring probe for liquids
Measuring probe as described in the temperature measurement technique, permanently integrated into the chamber base

ISO-compliant calibration certificate
included with all units

Pressure measurement technology
Electronic pressure sensor 0 to 6 bar, absolute or relative pressure measurement, programmable, probe breakage monitoring, resolution/display 0.1 kPa

ISO calibration certificate
included with all units

Water supply
Manual filling, sterilisation solution (aqueous) as the medium

Over-temperature protection for the heating system
Integrated into the heating system, monitored by the controller

Air sterilisation
Membrane filter, µ ≤ 0.2 µm, included as standard in all models

Display of service intervals
Automatic notification via multi-colour display

Microprocessor control
Control of all functions, display on multi-colour screen

Safety circuit
For monitoring the heating and chamber pressure

Timer
Programme start programmable by date and time

Audible alarm
Can be activated

Interfaces
Internal RS232 for printer
External USB for printer, network, connection to a computer

Sterilisation programmes
2 pre-set programmes at level 1:
Cell culture destruction at 134°C
Cell culture destruction at 121°C

Programmes can be modified individually (consultation with a technician from the manufacturer’s customer service department is required!).

Special programmes (e.g. Instruments 121°C, Instruments 134°C, Waste destruction 134°C) available as an option.

5 Level 2 programmes (programmes P6 to P10) protected by a code, preconfigured as P1.

Dimensions and weight:
External dimensions
(unit upright) (W x H x D)



840 x 965 x 700 mm

Colour options:

Red / Light grey

The lids have a red lacquered finish and are easy to clean by wiping with disinfectant. Red, as a signal colour, emphasises the autoclave’s function of destroying potentially pathogenic materials. The cladding panels have a light grey powder-coated finish across all colour variants; the visible part of the support frame is made of brushed stainless steel.

Weight (net)

approx. 205 kg

Maximum load:
Liquids


100 litres total volume, fed directly into the chamber
   

Sterilisation chamber:
Total volume


approx. 135 l

Chamber size (diameter x depth)

ø 500 x 660 (+50 – rounded) mm

Useful volume

approx. 100 l

Maximum permissible pressure (PS)

2.8 bar

Maximum permissible temperature (TS)

143°C

Nominal pressure of the safety valve

≤ 2.8 bar

Chamber material

1.4404 (SS 316 L)

Pressure Equipment Directive 97/23/EC

CE 0036, Cat. III, Modules B + C1
   

Power supply:
Supply voltage


3N 400V~ (±5%), 50 Hz, 16A

Mains plug

CEE 16 A plug

Rated power

6 kW

Average energy consumption per cycle,
with a load capacity of 100 l


approx. 13 kWh

Protection class

I

Degree of protection

IP24

Electromagnetic compatibility

in accordance with DIN EN 61326 / A1
   

Operating and storage environmental conditions:
Temperature


5 to 40 °C

Air humidity

85% max.

Heat dissipation into the environment

approx. 12% of rated power

CUSTOMER SERVICE is a top priority for us.

Our service network ensures short response times and competent service technicians with many years of experience in steam sterilization. Our fair prices and the service-friendly design of our devices keep costs low. We take care of your equipment.

Optional for the Laboklav ECO Wastewater

SegoSoft

SegoSoft - the fully automated, digital batch and process documentation for your sterilizers, thermal disinfectors, and sealing devices.

baskets

Grid baskets in various heights, see accessories.

We look forward to your call at +33 (0) 139809982, or you can simply use the form below.

Subject *
Company *
Name
Postcode *
Phone
City
Email *
Message *
Terms of use *

I agree to the terms of use and the privacy policy and confirm that I have read the information required under Article 13 of the GDPR.

send message